|
FINGERPRINTING INKLESS
PADS
-
The imprints dries instantly on any paper, preventing smudging
or filling the fingerprint
-
The imprints are
permanent, with a high contrast and resolution quality, that
makes them ideal for optical and photographical search.
-
The ink is completely removed from the fingers with the simple
action of rubbing with a damp paper towel.
-
Microporous ceramic surface that facilitates the flow of ink. Do
not contain alcohol or other toxic compounds.
Ref. :
LE-2C
(Ceramic)
Ref.
: LE-3C (Ceramica)
Med.: 5.50 cm x 4.50
cm
Med.:
11.50 cm x 8.00 cm
Cap.: +-
1.200 huellas
Cap.:
+- 12.000 huellas |
|
Live Scan Enhancer Pads have been developed to
improve the fingerprint ridges when scanned by an electronic system.
The resulting prints are not always perfect, often we find out worn
ridges as a consequence of not making a firm contact with the
scanner glass, the result is not ideal.
These problems can be eliminated through the use of pre-scanning
enhancers fingerprint
Using a pre-enhancer fingerprint scanning can limit the negative
impact of external factors and ensure that you get fingerprints
clear, readable and usable at all times.
Pre-Scan pads have an special formula that improves the quality of
the detail, accentuating the fingerprints crest.
 |
Ref.: FS-LS2
(5.50 x 4.50 cm)
Ref.: FS-LS3
(11.50 x 8.00 cm)
Instructions
-
Place your finger
on the
PreScan.
-
Press firmly but
softly over the surface of the pad.
-
Remove your
finger from the pad and lightly rub your finger with the thumb,
so that the transparent ink solution is evenly distributed on
your fingers.
-
This process will
allow the removal of an excess of any external solution.
-
Place your finger
on the scanner glass and take the fingerprint
|
